ＩＴ技術発信ブログ

I installed Lustre. I've written the installation document below. Please give me advice/suggestions on it. I would appreciate any kind of advice/suggestion!

= Lustre on CetnOS 5.3

             192.168.0.10
              [client]
                  |
                  |
                  |
     ----------------------------
     |            |             |
     |            |             |
   [MDT]        [OST1]        [OST2]
192.168.0.11  192.168.0.12  192.168.0.13

> rpm -ivh kernel-lustre-smp-2.6.18-128.1.6.el5_lustre.1.8.0.1.x86_64.rpm
> rpm -ivh lustre-modules-1.8.0.1-2.6.18_128.1.6.el5_lustre.1.8.0.1smp.x86_64.rpm
> rpm -ivh lustre-1.8.0.1-2.6.18_128.1.6.el5_lustre.1.8.0.1smp.x86_64.rpm
> rpm -ivh lustre-client-1.8.0.1-2.6.18_128.1.6.el5_lustre.1.8.0.1smp.x86_64.rpm
> rpm -ivh lustre-client-modules-1.8.0.1-2.6.18_128.1.6.el5_lustre.1.8.0.1smp.x86_64.rpm
> rpm -ivh lustre-ldiskfs-3.0.8-2.6.18_128.1.6.el5_lustre.1.8.0.1smp.x86_64.rpm


> vim /etc/grub.conf

default=0 ########## Change to 0 ###########
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
hiddenmenu
title CentOS (2.6.18-128.1.6.el5_lustre.1.8.0.1smp)
root (hd0,0)
kernel /vmlinuz-2.6.18-128.1.6.el5_lustre.1.8.0.1smp ro root=/dev/VolGroup00/LogVol00
initrd /initrd-2.6.18-128.1.6.el5_lustre.1.8.0.1smp.img
title CentOS (2.6.18-128.2.1.el5)
root (hd0,0)
kernel /vmlinuz-2.6.18-128.2.1.el5 ro root=/dev/VolGroup00/LogVol00
initrd /initrd-2.6.18-128.2.1.el5.img
title CentOS (2.6.18-128.el5)
root (hd0,0)
kernel /vmlinuz-2.6.18-128.el5 ro root=/dev/VolGroup00/LogVol00
initrd /initrd-2.6.18-128.el5.img

> reboot

> vim /etc/hosts
192.168.0.11 lustre1
192.168.0.12 lustre2
192.168.0.13 lustre3

= MDT Server

> mkfs.lustre --fsname=test --mgs --mdt --device-size=262144 /tmp/mdt0
> mkdir -p /mnt/mdt0
> mount -t lustre -o loop /tmp/mdt0 /mnt/mdt0

= OST Server 1

> mkfs.lustre --fsname=test --ost --mgsnode=lustre1 --device-size=1048576 /tmp/ost0
> mkfs.lustre --fsname=test --ost --mgsnode=lustre1 --device-size=1048576 /tmp/ost1
> mkdir -p /mnt/ost0 /mnt/ost1
> mount -t lustre -o loop /tmp/ost0 /mnt/ost0
> mount -t lustre -o loop /tmp/ost1 /mnt/ost1

= OST Server 2

> mkfs.lustre --fsname=test --ost --mgsnode=lustre1 --device-size=1048576 /tmp/ost2
> mkfs.lustre --fsname=test --ost --mgsnode=lustre1 --device-size=1048576 /tmp/ost3
> mkdir -p /mnt/ost2 /mnt/ost3
> mount -t lustre -o loop /tmp/ost2 /mnt/ost2
> mount -t lustre -o loop /tmp/ost3 /mnt/ost3


= Client

> mkdir -p /mnt/test
> mount -t lustre lustre1:/test /mnt/test

ラベル: Distribute Storage